The effects of low-level laser therapy and photodynamic therapy on oral health of fixed orthodontics patients. A systematic review and meta-analysis.

Objective To investigate the effect of low-level laser and photodynamic therapy on the oral health, and periodontal tissue of fixed orthodontic patients and the effect of using photobiomodulation methods compared to routine plaque removal methods and the amount of plaque in fixed orthodontic patients. Method and materials First, the title and summary of related articles were collected by using the search strategy electronic databases PUBMED, EMBASE, Cochrane's CENTRAL, Scopus, ISI and all the articles that were published from the beginning to February 2023 were evaluated. The title, abstracts and full texts of all the relevant studies were reviewed respectively, and those meeting the criteria were entered into our study. Finally, the quality of the studies was examined and the results of the studies were pooled by means of random effects inverse variance meta-analysis. Results Eighteen randomized studies, conducted between 2015 and December 2022, were selected for meta-analysis. Five studies were conducted as split-mouth, twelve as parallel-group, and one as a cross-over design. Among the studies, five examined the effects of low-level laser therapy and twelve assessed the effects of photodynamic therapy. The meta-analysis revealed that photodynamic therapy significantly reduced probing depth compared to scaling (MD=-0.2 mm, P<0.001), though the difference does not seem to be clinically significant. But no significant differences between photodynamic therapy and scaling or low-level laser therapy and control groups in terms of plaque index, or bleeding on probing, gingival crevicular fluid volume, gingival recession, clinical attachment loss, bacterial load and concentrations of inflammatory substances across multiple follow-up periods. Conclusion Moderate evidence indicates that photodynamic therapy (PDT) is comparable to conventional methods in improving oral health, as measured by periodontal indices, inflammatory proteins, bacterial colonies, and white spot lesions, making it a suitable alternative. Limited evidence suggests low-level laser therapy (LLLT) may improve oral health, particularly addressing caries, but further research is needed.

The Effects of Intrusion of Anterior Teeth by Skeletal Anchorage in Deep Bite Patients; A Systematic Review and Meta-Analysis.

BACKGROUND: Deep bite is known as one of the most common malocclusions, and its treatment and retention are often challenging. The use of mini-screws has been suggested as an ideal method for the intrusion of incisors in deep-bite patients. Still, there are conflicting reports regarding the superiority of this method compared to other common treatments. AIM: The aim of this systematic review and meta-analysis was to evaluate the effects of the intrusion of anterior teeth by skeletal anchorage in deep bite patients. METHODS: From the beginning to 15 September 2022, articles on the topic of interest were searched in electronic databases including PubMed, Web of Science, Scopus, EMBASE, and Cochrane's CENTRAL. Additionally, a hand search for pertinent studies and a search of the grey literature were carried out. After the selection of eligible studies, data extraction was performed using piloted forms. Inverse-variance random-effects meta-analyses were used to combine the outcome measures of dental indices, skeletal cephalometric indices, and dental cephalometric indices. RESULTS: A total of 15 studies (6 RCT; 9 CCT) were included in the systematic review and 14 were used in the meta-analyses. The differences in overbite changes (MD = -0.45, p = 0.04), true incisor intrusion [u1-pp] (MD = -0.62, p = 0.003) and molar extrusion [u6-pp] (MD = -0.40, p = 0.01) were statistically significant and TADs showed better treatment results than other intrusion methods (segmented intrusion arch, utility arch, J hook headgear). No significant differences regarding overjet, molar and incisor tipping, and skeletal indices between mini-screw and other intrusion methods could be found. CONCLUSION: The use of mini-screws leads to lower overbite and higher true intrusion (about 0.45 and 0.62 mm, respectively) compared to the use of other methods for intruding upper incisors. Furthermore, the effect of TAD on extrusion of molar teeth is less (by 0.4 mm) than other methods.

Effect of Ozonated Water on the Color Stability of Denture Teeth and Heat Polymerized Acrylic Base Resin

Abstract Objective: To determine the effect of ozonated water on the color stability of denture tooth and denture bases. Material and Methods: Thirty denture base discs consisting of 15 Acropars and 15 ProBase Hot specimens with the dimensions of 40 × 5 mm were prepared. Fifteen denture teeth in shade A1 (Ivoclar Vivadent, Schaan, Liechtenstein) were mounted in a specific acrylic jig. All specimens were immersed in three solutions (1% sodium hypochlorite, ozonated water, and distilled water) for four months (one year of clinical use). Color measurements were done with a spectrophotometer and assessed using the CIE L*a*b* colorimetric system (0, 4, 8, 12, and 16 weeks). Data were analyzed using the three-way ANOVA and Tukey test (α=0.05). Results: Tukey's post hoc test revealed a significant change in color in the Acropars denture base for the distilled water group compared to the ozonated water and 1% hypochlorite (p<0.05). Regarding the ProBase Hot denture base, significantly less color change was observed in the 1% hypochlorite group compared to the ozonated water and distilled water (p≤0.001). For the denture teeth, significantly less color change was seen in the distilled water group than in the ozonated water (p=0.015) and 1% hypochlorite (p<0.05) groups. Conclusion: The color change of denture bases and denture tooth in ozonated water are acceptable. Ozonated water can be considered a good disinfectant for cleaning dentures.

Effects of Magnesium Oxide Nanoparticles Incorporation on Shear Bond Strength and Antibacterial Activity of an Orthodontic Composite: An In Vitro Study.

This study aimed to evaluate the effects of magnesium oxide (MgO) nanoparticle (NP) incorporation on shear bond strength (SBS) and antibacterial property of orthodontic composites. A total of 100 mounted premolar teeth were randomly divided into five groups. In group 1 (control), the brackets were bonded to the teeth using the GC Ortho Connect orthodontic composite, while the brackets of groups 2 to 5 were bonded by the GC Ortho Connect orthodontic composite that contained 0.5%, 1%, 2%, and 4% weight percentages (w/w) of MgO NPs, respectively and then the SBS was measured. In the following, we evaluated the antibacterial properties of the MgO NP-containing composite on Streptococcus mutans (S. mutans) bacteria by the direct contact test method. According to results, there were no significant changes in the SBS as the MgO NP concentration was increased up to 1%, while the SBSs of the 2% and 4% MgO NPs were decreased when compared to the other three groups. The outcomes of the direct contact test indicated the case of 1% as being the minimum ratio of MgO NPs, which almost caused the entire annihilation of the S. mutans bacteria. In conclusion, the orthodontic composite containing 1% MgO NPs can display a significant antibacterial effect against S. mutans bacteria without inducing any negative effect on the SBS.

Effect of ibuprofen and low-intensity pulsed ultrasound on the reduction of pain after initial archwire placement: a double-blind randomized clinical trial / Efecto del ibuprofeno y el ultrasonido pulsado de baja intensidad en la reducción del dolor después de la colocación inicial del arco de ortodoncia: un ensayo clínico aleatorizado doble ciego

Objective: This study aimed to compare the effect of ibuprofen and low intensity pulsed ultrasound (LIPUS) on the reduction of pain after the placement of initial archwire in orthodontic patients. Material and Methods: This double-blind clinical trial study was carried out on 60 female candidates for fixed orthodontic treatment referring to the Orthodontic Department of School of Dentistry in Mashhad University of Medical Sciences, Mashhad, Iran, during 2015-2016. The subjects were divided into four groups of ibuprofen, LIPUS, placebo, and mock LIPUS. A questionnaire and a rectangular and flexible cubic silicone were given to each patient to record the severity of pain based on the visual analog scale at specified time points (i.e., 2 h, 6 h, at bedtime, 2nd, 3rd, and 7th days after archwire placement) when biting the silicone block with the anterior and posterior teeth and without biting at all. Repeated measures analysis of variance was used in order to compare the pain severity at different time points. Results: The comparison of pain severity at various time points showed that the highest and lowest mean scores of pain were reported at bedtime and seven days after the intervention (p<0.001). In each of the three conditions (i.e., biting the silicone block with the anterior and posterior teeth and without biting the teeth) at six time points (i.e., 2 h, 6 h, at bedtime, 2nd, 3rd, and 7th days following archwire placement), no significant difference was observed in the severity of pain (p>0.05). Conclusion: In conclusion, LIPUS (with a frequency of 1 MHz and an intensity of 100 mW) and ibuprofen have no significant effects on reduction of the pain severity at different time points and various conditions in orthodontic patients.

Objetivo: Este estudio tuvo como objetivo comparar el efecto del ibuprofeno y el ultrasonido pulsado de baja intensidad (LIPUS) en la reducción del dolor después de la colocación del arco inicial en pacientes de ortodoncia. Material y Métodos: Este estudio de ensayo clínico doble ciego se llevó a cabo en 60 candidatas a tratamiento de ortodoncia fija referidas al Departamento de Ortodoncia de la Facultad de Odontología de la Universidad de Ciencias Médicas de Mashhad, Mashhad, Irán, durante 2015-2016. Los sujetos se dividieron en cuatro grupos: ibuprofeno, LIPUS, placebo y LIPUS simulado. Se entregó un cuestionario y un bloque de silicona cúbica rectangular y flexible a cada paciente para registrar la intensidad del dolor según la escala analógica visual en puntos de tiempo específicos (es decir, 2 h, 6 h, hora de acostarse, 2do, 3er y 7mo día después de la colocación del arco) al morder el bloque de silicona con los dientes anteriores y posteriores, y sin morder en absoluto. Se utilizó el análisis de varianza de medidas repetidas para comparar la intensidad del dolor en diferentes momentos.Resultados: La comparación de la intensidad del dolor en varios puntos de tiempo mostró que las puntuaciones medias de dolor más altas y más bajas se informaron a la hora de acostarse y siete días después de la intervención (p<0,001). En cada una de las tres condiciones (es decir, al morder el bloque de silicona con los dientes anteriores y posteriores, y sin morder) en seis momentos (2 h, 6 h, antes de acostarse 2do, 3er y 7mo día después de la colocación del arco), no se observó diferencia significativa en la severidad del dolor (p>0.05).Conclusión: En conclusión, LIPUS (con una frecuencia de 1 MHz y una intensidad de 100 mW) y el ibuprofeno no tienen efectos significativos en la reducción de la severidad del dolor en diferentes puntos de tiempo y diversas condiciones en pacientes de ortodoncia.

The Evaluation of Microshear Bond Strength of Resin Cements to Titanium Using Different Surface Treatment Methods: An In Vitro Study.

This study attempted to investigate the effect of sandblasting and H2O2 treatments on the microshear bond strength of two commercially available resin cements. A total of 90 cube-shaped specimens of commercially pure titanium (cp-Ti) were divided into two groups of Panavia and MHA cements (n = 45). Samples of the Panavia group were randomly divided into three subgroups of 15 samples, including subgroups (no treatment, aluminum oxide sandblasting, and immersion in 35% hydrogen peroxide solution with halogen light). Once the treatment was completed, Panavia V5 was applied on the cp-Ti surface by a Tygon tube. The 45 specimens of the MHA cement group were randomly divided into three subgroups (n = 15) similarly to the Panavia group. Then, the MHA was applied on the surface of cp-Ti. A universal testing machine was used to measure and examine the microshear bond strength of cement to cp-Ti subsequent to the step of thermocycling. According to results, in the Panavia cement group, the SBS of sandblasting treatment was significantly higher than that of the H2O2 treatment subgroup (p < 0.05), which displayed a significantly higher SBS than that of the no-treatment subgroup (p < 0.001). In regard to the MHA group, the SBS of the H2O2 treatment subgroup was significantly lower than that of the sandblasting treatment subgroup (p < 0.001), whereas there were no significant differences between the SBS of the no treatment and H2O2 treatment subgroups (p = 0.35). Considering the comparison between Panavia and MHA cases, there were no significant differences observed among the no-treatment subgroups (p = 0.34), as well as the sandblasting treatment subgroups (p = 0.67), while the SBS of the H2O2 treatment subgroup in Panavia cement was higher than that of the H2O2 subgroup in MHA cement (p < 0.001). In conclusion, in both Panavia V5 and MHA cements, sandblasting treatment could improve the bond strength between the titanium surface. However, H2O2 treatment proved to be capable of enhancing the bond strength of Panavia V5 cement without causing any positive effects on the bond strength of MHA cement.

Comparison of the High Cycle Fatigue Behavior of the Orthodontic NiTi Wires: An in Vitro Study

Abstract Objective: To compare the high-cycle fatigue behavior of four commercially available NiTi orthodontic wires. Material and Methods: Twelve NiTi orthodontic wires, round, 0.016-in, three per brand, were selected and divided into four groups: G1 - Heat-activated NiTi, G2 - Superelastic NiTi, G3 - Therma-Ti, and G4 - CopperNiTi. The atomic absorption spectrometry method was used to determine the chemical composition of investigated NiTi wires. We also performed a fatigue test at three-point bending using a universal testing machine for 1000 cycles in a 35 °C water bath. For the first and thousandth cycle, the average plateau load and the plateau length were determined in the unloading area of the force versus displacement diagram. In addition, we calculated the difference between the average plateau load of the first and thousandth cycle (∆F), as well as the difference between the plateau length of both cases (∆L). Results: According to our results, there were no significant differences between the average plateau load of the first and thousandth cycles of each group (p>0.05) and in the plateau length of the first and thousandth cycles of the groups (p>0.05). Conclusion: There were no significant differences between the groups changing the superelasticity property after high-cycle fatigue.

Green synthesis of nickel oxide nanoparticles using Salvia hispanica L. (chia) seeds extract and studies of their photocatalytic activity and cytotoxicity effects.

The physical and chemical properties of Nickel oxide nanoparticles (NiO-NPs) have attracted the attention of many and in this regard, this study was performed to produce NiO-NPs by the means of Salvia hispanica L. (chia) seeds extract as the capping agent. Physical and morphological features of the obtained NiO-NPs were examined through the application of TGA, FTIR, UV-Vis, XRD, FESEM/EDAX/PSA, and VSM procedures. According to the FESEM/PSA images, the biosynthesized NiO-NPs contained a spherical shape and a size of about 30 nm, while the results of the EDAX study approved the existence of oxygen and nickel elements in the structure of this product. Furthermore, certain corresponding peaks to the crystal structure of NiO-NPs were observed throughout the XRD pattern. Next to the superparamagnetic behavior that was detected in the results of VSM analysis, the cytotoxicity effect of NiO-NPs was not reported to be dependent on concentration. Considering the high photocatalytic capacity along with the low cytotoxic effects of NiO-NPs, we can suggest the applicability of this product for various applications such as disease control and removal of residual toxins.

Effect of the addition of Chitosan and TiO2nanoparticles on antibacterial properties of an orthodontic composite in fixed orthodontic treatment: a randomized clinical trial study.

Due to the existing demands for methods independent of patient co-operation in preventing and overcoming the incidence of white spot lesions (WSLs) and caries in fixed orthodontic treatments, several studies have considered the modification of orthodontic composites using antimicrobial nanomaterials. In this regard, the aim of this study is to investigate the effect of the addition of chitosan nanoparticles (NPs) and TiO2NPs onStreptococcus mutans(S. mutans) counts and the enamel mineral content in fixed orthodontic patients. A double-blind randomized clinical trial study was carried out in 24 patients (i.e., 48 upper second premolars and 48 maxillary lateral incisors) who were candidates for fixed orthodontic treatment. In the case of the control group, the bracket was bonded to the tooth with an orthodontic adhesive (Transbond XT, 3M Unitek, USA) while, in the experimental group, the bracket was bonded to the tooth with Transbond XT containing 1% chitosan NPs and 1% TiO2NPs. For the maxillary lateral incisor and upper second premolar teeth, theS. mutanscounts around the brackets were measured, through the usage of real-time PCR, at the time points of 1 day, 2 months, and 6 months after bonding the brackets to the tooth. Furthermore, the enamel mineral content measurement was also performed around the brackets at 1 day, 2 months, and 6 months after bonding the brackets to the tooth. TheS. mutanscounts were analyzed using Friedman and Mann-Whitney U tests. The Repeated measures ANOVA test and Independent samples T-test were also applied, in order to evaluate the mineral content. According to the results, there was a significant reduction in theS. mutanscounts of experimental group at the time points of 1 day, 2 months, and 6 months in both maxillary lateral incisor and upper second premolar teeth. However, we did not observe any significant differences in the control group between the reports at 1 day, 2 months, and 6 months in both maxillary lateral incisor and upper second premolar teeth. The outcomes of this study indicate that, with regard to maxillary lateral incisor teeth, there were no significant differences between the results of the experimental group and control group at the time points of 1 day, 2 months, and 6 months. Furthermore, with respect to the upper second premolar teeth, no significant differences were observed between the two groups at 1 day and 2 months; however,S. mutanscounts were significantly lower in the experimental group than in the control group at the time point of 6 months. Moreover, our gathered data confirmed the absence of any significant differences between the experimental group and control group, in terms of enamel mineral content, at the time intervals of 1 day, 2 months, and 6 months. In conclusion, the incorporation of chitosan NPs and TiO2NPs in orthodontic composites induces an antibacterial property in the resultant adhesive to be used for fixed orthodontic treatment.

When metal-organic framework mediated smart drug delivery meets gastrointestinal cancers.

Cancers of the gastrointestinal tract constitute one of the most common cancer types worldwide and a ∼58% increase in the global number of cases has been estimated by IARC for the next twenty years. Recent advances in drug delivery technologies have attracted scientific interest for developing and utilizing efficient therapeutic systems. The present review focuses on the use of nanoscale MOFs (Nano-MOFs) as carriers for drug delivery and imaging purposes. In pursuit of significant improvements to current gastrointestinal cancer chemotherapy regimens, systems that allow multiple concomitant therapeutic options (polytherapy) and controlled release are highly desirable. In this sense, MOF-based nanotherapeutics represent a significant step towards achieving this goal. Here, the current state-of-the-art of interdisciplinary research and novel developments into MOF-based gastrointestinal cancer therapy are highlighted and reviewed.

Incorporation of Chitosan Nanoparticles into a Cold-Cure Ortho-Dontic Acrylic Resin: Effects on Mechanical Properties.

Improvement of the antibacterial properties of acrylic resins, used in the construction of removable orthodontic appliances, is an important strategy to reduce the incidence of caries and oral diseases in orthodontic treatments. The addition of antimicrobial agents to acrylic resins is one of the effective methods to enhance the antimicrobial properties of these materials. However, one main concern is that modification of acrylic resin has negative effects on its mechanical properties. Recently, chitosan nanoparticles (NPs), as biocompatible and biodegradable polysaccharides with remarkable antimicrobial properties, have been used in different areas of dentistry and medicine. This study aimed to investigate the effects of adding chitosan NPs on the mechanical properties of a cold-cure orthodontic acrylic resin. The chitosan NPs were added to the acrylic resin in various weight percentages: 0% (control), 0.5%, 1%, 2%, and 4%. The flexural strength, compressive strength, Vickers microhardness, and impact strength measurements were performed for all five groups. The results showed that adding up to 1% (w/w) chitosan NPs to an acrylic resin had no significant negative effects on its flexural strength and compressive strength, while it decreased these parameters at weight percentages of 2% and 4% (w/w). The results also revealed that modification of acrylic resin with chitosan NPs up to 4% had no significant negative effects on the microhardness and impact strength of acrylic resin. In conclusion, the addition of chitosan NPs up to 1% (w/w) had no significant negative effects on the mechanical properties of cold-cure acrylic resin.

Antimicrobial Activity of Colloidal Selenium Nanoparticles in Chitosan Solution against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans

ABSTRACT Objective: To investigate the antimicrobial activity of colloidal selenium nanoparticles in chitosan solution (Cts-Se-NPs) against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans. Material and Methods: Cts-Se-NPs solution was prepared using a simple chemical reduction method. The MIC and MBC against S. mutans, L. acidophilus, and C. albicans were determined using the broth dilution assay. Results: The Cts-Se-NPs had remarkable antimicrobial activity against S. mutans, L. acidophilus, and C. albicans. The MIC values of the Cts-Se-NPs were lowest for S. mutans (0.068 mg/ml) compared to L. acidophilus (0.137 mg/ml), and C. albicans (0.274 mg/ml). The MBC values of the Cts-Se-NPs against the microorganisms after one, two, six, and 24 hours indicated that the concentration of 0.274 mg/ml of Cts-Se-NPs completely killed S. mutans, L. acidophilus, and C. albicans after one, two, and six hours, respectively. At the concentration of 0.137 mg/ml, S. mutans and L. acidophilus were killed after six and 24 hours, respectively. Conclusion: These findings encourage the potential use of Cts-Se-NPs in dentistry, while further clinical research is required in this area.

The effects of photobiomodulation therapy for treatment of alveolar osteitis (Dry Socket): Systematic review and meta-analysis.

INTRODUCTION: Dry socket (alveolar osteitis) is one of the most common complications that occur after the extraction of permanent teeth. The aim of this review was to evaluate and compare the effectiveness of photobiomodulation (PBT) with other treatment methods on alveolar osteitis. METHODS AND MATERIALS: MEDLINE, Web of Science, EMBASE, Scopus and Cochrane's CENTRAL online databases were searched based on the search strategy. Also, the prominent laser journals and the references of relevant studies were hand searched for eligible studies and then the data were extracted from the retrieved studies were extracted using piloted custom forms. The data were combined and analyzed using inverse-variance random-effect meta-analysis. RESULTS: For the treatment of dry socket, pain perception based on the VAS score, PBT on average has a 3.41 higher pain level reduction compared to alveogyl which seems to be both statistically and clinically significant. In addition, based on the GRADE score, the evidence seems to be of moderate quality. Also, in the individual studies which were included in this systematic review, PBT seems to be more effective than other methods (Salicept, zinc-oxide eugenol, ozone, and photodynamic therapy) in pain reduction of patients with alveolar osteitis. CONCLUSIONS: PBT, in general, has a higher ability in decreasing pain levels for patients with alveolar osteitis (dry socket) compared to alveogyl. Therefore, PBT could be used as an appropriate method for treatment and controlling the signs of dry socket.

Effect of micro-osteoperforation on the rate of orthodontic tooth movement-a systematic review and a meta-analysis.

BACKGROUND: The micro-osteoperforation can be used to increase the rate of tooth movement, simplify complex orthodontic movements, and also help adjust the anchorage but there are conflicting reports on the effectiveness and adverse effects of this intervention. OBJECTIVES: The aim of our systematic review and meta-analysis was to evaluate the effects of micro-osteoperforation on the rate of tooth movement in patients undergoing orthodontic treatment. SEARCH METHODS: A comprehensive search of MEDLINE, ISI web of science, EMBASE, Scopus, and CENTRAL online databases for studies measuring the effects of micro-osteoperforation on the rate of orthodontic tooth movement from inception to February 2019 was performed. SELECTION CRITERIA: Based on the PICO model, human studies which evaluated the effects of MOP on the rate of tooth movement in patients undergoing orthodontic treatment were selected for this review. DATA COLLECTION AND ANALYSIS: The relevant data from the eligible studies were extracted using piloted custom extraction forms. The data were combined and analysed using inverse-variance random-effect meta-analysis and the mean difference was used for comparing the outcome measures. RESULTS: Six randomized clinical trials were finally included in this meta-analysis. The rate of canine retraction per month was significantly higher in the MOP group [mean difference (MD) = 0.45 mm, 95% CI = 0.17-0.74]. These results were similar with regard to different malocclusions, the jaw on which it was performed, and MOP methods. The patients did not report any significant differences in terms of pain severity levels after MOP. With regard to the adverse effects, one study reported higher amounts of root resorption among patients undergoing MOP. CONCLUSIONS: The rate of tooth movement was increased after performing MOP but in at least one study higher root resorption was observed. Therefore, the use of MOP can be recommended after weighing the benefits and disadvantages this intervention can bring for each patient. REGISTRATION: The protocol for this review was registered via crd.york.ac.uk/prospero with the ID CRD42019115499.

Comparison of the success rate of a bioactive dentin substitute with those of other root restoration materials in pulpotomy of primary teeth: Systematic review and meta-analysis.

BACKGROUND: Several root canal restoration materials can be used after pulpotomy in primary teeth; however, it is unclear which is the most successful. The authors' aim in this systematic review and meta-analysis was to compare the radiographic and clinical failure rates of a calcium silicate-based bioactive material (Biodentine, Septodont) with those of other root restoration materials such as mineral trioxide aggregate (MTA), formocresol, and ferric sulfate. TYPES OF STUDIES REVIEWED: On the basis of the determined study strategy, the authors performed a comprehensive search of the MEDLINE, Web of Science, Embase, and Cochrane Central Register of Controlled Trials online databases. The authors considered only randomized controlled trials. In the included studies, the authors compared the clinical and radiographic failure rates at different follow-up times of the pulpotomy of primary teeth with extensive caries treated by using Biodentine and other root restoration materials. RESULTS: All of the included studies had an unknown or high risk of bias. On the basis of the Grading of Recommendations Assessment, Development and Evaluation scale, the quality of evidence for the comparison of MTA and Biodentine was moderate. Biodentine had a statically significantly higher radiographic failure rate than did MTA at 6 and at 9 through 12 months after pulpotomy. The authors found no substantial differences between the clinical failure rates of Biodentine and MTA and the radiographic or clinical failure rates of Biodentine and formocresol or of Biodentine and ferric sulfate. CONCLUSIONS AND PRACTICAL IMPLICATIONS: MTA has a significantly lower radiographic failure rate than does Biodentine but no difference in clinical failure rates. On the basis of this result, the dentist can weigh the advantages and disadvantages of using Biodentine, MTA, ferric sulfate, and formocresol and can make a more informed decision about using the proper root restoration material.

Evaluation of the Relationship Between Morphology, Volume, and Density of the Mandible and Dentofacial Vertical Dimension Using Cone Beam Computed Tomography

Abstract Objective: To evaluate the relationship between mandibular shape, mandibular bone density, cortical bone thickness, and condylar volume and facial height using a cone-beam computed tomography (CBCT). Material and Methods: Fifteen female patients (16-25 years old) were included in this study. The following measurements were performed on CBCT radiographs; inter-canine and inter-molar width of the mandible at three vertical points (alveolar crest, apex and basal bone), mandibular cortical bone thickness in disto molar and canine sections, bone density of the mandibular body and condylar volume. Afterward, subjects were divided into short face, normal and long face groups according to the Frankfort-mandibular plane angle (FMA) measured on lateral cephalograms obtained from CBCTs. Data were analyzed using Pearson correlation, one-way ANOVA, and post-hoc analysis Results: The inter-canine width of the mandible at the apical point in long face subjects was greater than in the other groups. Likewise, the cortical bone thickness was significantly higher in long face patients compared to the short face and normal subjects. There was no statistically significant difference in mandibular density or condylar volume between patients with various vertical heights (p>0.1) Conclusion: Vertical growth pattern is correlated with mandibular morphology to some extent.

An In Vitro Study on the Effect of Amorphous Calcium Phosphate and Fluoride Solutions on Color Improvement of White Spot Lesions.

The ability of remineralizing agents to improve the color of white spot lesions (WSL) is an important aspect that should be investigated. The aim of this study was to evaluate the effects of 0.05% amorphous calcium phosphate (ACP), 0.5% ACP, and 0.05% fluoride solutions, as well as artificial saliva on the color improvement of white spot lesions (WSLs). In this in vitro study, 50 human premolar teeth were randomly classified into five groups. At baseline, all the samples were assessed by using a colorimeter (E0). Then, white spot lesions were induced on the surface of the teeth by means of a pH-cycling model, and the colorimeter was used again (E1). Afterwards, samples of the 1st and 2nd groups were kept in 0.05% ACP and 0.5% ACP solutions for 1 min/day, respectively. The 3rd group specimens were placed in 0.05% fluoride solution for 1 min/day. The other two groups were kept in artificial saliva and distilled in water separately. All the samples were assessed by the colorimeter for a third time (E2). We found no significant difference between the groups in ∆E1. There was also no significant difference among 0.05% ACP solution, 0.5% ACP solution, 0.05% fluoride solution, and artificial saliva considering ∆E2. However, a significant difference was noted between the above-mentioned solutions and distilled water in ∆E2. With respect to ∆E3, there were considerable differences between ACP solution and artificial saliva. The same results were obtained for the difference between fluoride solution and artificial saliva. However, no significant difference was found among 0.05% ACP, 0.5% ACP, and 0.05% fluoride solutions in terms of ∆E3. In Conclusion, ACP is as effective as fluoride in the color improvement of WSLs and the recommended treatment for this purpose is daily use of 0.05% ACP, 0.5% ACP or 0.05% fluoride solutions.

Effect of the Time of Salivary Contamination during Light Curing on Degree of Conversion and Microhardness of a Restorative Composite Resin.

Saliva contamination is a major clinical problem in restorative procedures. The purpose of this study was to evaluate the effect of the time of salivary contamination during light curing on the degree of conversion and the microhardness of a restorative composite resin. Eight groups of 10 samples for measuring the microhardness and eight groups of 5 samples for evaluating the degree of conversion were prepared. The samples of each group were contaminated with human saliva at a certain time. The first group (T0) was contaminated before light curing. The specimens in groups T2-T30 were contaminated at 2, 5, 10, 15, 20 and 30 s after the start of light curing, respectively. The samples of group T40 were contaminated after light curing. The degree of conversion and the microhardness of the specimens were measured by Fourier transform infrared (FTIR) spectroscopy and Vickers hardness testing techniques, respectively. The results of this study revealed that there were no significant differences between the groups in terms of the degree of conversion of the composite resin. Consistent with the findings for the degree of conversion, significant differences in the microhardness between the groups were not found. In conclusion, from a clinical point of view, the results of our study showed that the time of salivary contamination (before, during or after light curing of composite resin) has no significant effect on the polymerization (degree of conversion) and one of the important mechanical properties of dental composite resins (microhardness).

Incorporation of CPP-ACP into Luting and Lining GIC: Influence on Wear Rate (in the Presence of Artificial Saliva) and Compressive Strength.

The improvement of mechanical and antibacterial properties of glass ionomer cements (GICs) is an important goal in dental research. In this way, modification of GIC with caries preventive and remineralizing materials such as casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) is a new strategy to enhance its anticariogenic properties and the remineralization of teeth. However, one main concern is that adding CPP-ACP may have negative effects on the mechanical properties of GIC. This study investigated the influence of adding CPP-ACP on the wear rate (in the presence of artificial saliva) and compressive strength of luting and lining glass ionomer cement. CPP-ACP was incorporated into a luting and lining glass ionomer cement at different percentages (1, 1.56, and 2%). Wear rate and compressive strength were measured for each group using Pin-on-Disk tribometer device (in artificial saliva condition) and universal testing machine, respectively. The wear test was carried out in the presence of artificial saliva for better simulation of the oral environment. Our results demonstrated that increasing the percentage of CPP-ACP from 0 up to 1.56% (w/w), caused a decrease of 19% in the wear rate. However, at 2% (w/w) CPP-ACP, the wear rate increased. Compressive strength was improved by 31% when the CPP-ACP concentration was increased to 1.56% (w/w), but decreased when the concentration was raised to 2% (w/w). In conclusion, adding 1.56% CPP-ACP into luting and lining glass ionomer cement appears to provide an acceptable combination of two important mechanical properties, compressive strength and wear rate.